Reasons for shrinkage in floor coating
Subsea Gaskets ,Api17D Gasket,Sbx Ring Gasket,Subsea Gasket WENZHOU JINGWEI SEAL TECHNOLOGY CO., LTD , https://www.ringjoint-gasket.com
According to experts, epoxy floor coatings companies generally deal with such issues as follows.
The bottom sanding should be uniform, and at the same time, it must be fully polished, and there must be no place for leakage. Finally, it is thoroughly and uniformly sanded with fine sand (high-mesh) paper, and the dust generated by the sanding is cleaned and the floor paint is applied. Work can be resolved. Thoroughly clean up the contaminated painted surface, and then conduct floor paint construction to avoid such phenomena. Thoroughly clean up the air compressor, the conduit, the water and grease in the spray gun, and then proceed with construction. Or look for sources of pollution, block pollution from the source, and handle the environment of the floor paint construction site. Use a compatible epoxy floor paint.